讨论社区

S9罢工风扇转,无算力Fatal Error: some Fan lost or Fan speed low

[    0.000000] Booting Linux on physical CPU 0x0

[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017

[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

[    0.000000] Machine model: Xilinx Zynq

[    0.000000] cma: CMA: reserved 128 MiB at 16800000

[    0.000000] Memory policy: Data cache writealloc

[    0.000000] On node 0 totalpages: 126976

[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000

[    0.000000]   Normal zone: 992 pages used for memmap

[    0.000000]   Normal zone: 0 pages reserved

[    0.000000]   Normal zone: 126976 pages, LIFO batch:31

[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768

[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096

[    0.000000] pcpu-alloc: [0] 0 [0] 1 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984

[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait

[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)

[    0.000000] Virtual kernel memory layout:

[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)

[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)

[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)

[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)

[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)

[    0.000000] Preemptible hierarchical RCU implementation.

[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.

[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.

[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2

[    0.000000] NR_IRQS:16 nr_irqs:16 16

[    0.000000] ps7-slcr mapped to df802000

[    0.000000] zynq_clock_init: clkc starts at df802100

[    0.000000] Zynq clock init

[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns

[    0.000313] ps7-ttc #0 at df804000, irq=43

[    0.000623] Console: colour dummy device 80x30

[    0.000654] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)

[    0.040212] pid_max: default: 32768 minimum: 301

[    0.040434] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

[    0.040455] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

[    0.042579] CPU: Testing write buffer coherency: ok

[    0.042916] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

[    0.042976] Setting up static identity map for 0x4c4b00 - 0x4c4b58

[    0.043201] L310 cache controller enabled

[    0.043220] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB

[    0.121038] CPU1: Booted secondary processor

[    0.210231] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

[    0.210363] Brought up 2 CPUs

[    0.210383] SMP: Total of 2 processors activated.

[    0.210391] CPU: All CPU(s) started in SVC mode.

[    0.211052] devtmpfs: initialized

[    0.213466] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

[    0.214680] regulator-dummy: no parameters

[    0.222355] NET: Registered protocol family 16

[    0.224547] DMA: preallocated 256 KiB pool for atomic coherent allocations

[    0.226849] cpuidle: using governor ladder

[    0.226863] cpuidle: using governor menu

[    0.234324] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered

[    0.235851] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.

[    0.235865] hw-breakpoint: maximum watchpoint size is 4 bytes.

[    0.235978] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000

[    0.257810] bio: create slab <bio-0> at 0

[    0.259239] vgaarb: loaded

[    0.259972] SCSI subsystem initialized

[    0.260982] usbcore: registered new interface driver usbfs

[    0.261306] usbcore: registered new interface driver hub

[    0.261537] usbcore: registered new device driver usb

[    0.262062] media: Linux media interface: v0.10

[    0.262219] Linux video capture interface: v2.00

[    0.262458] pps_core: LinuxPPS API ver. 1 registered

[    0.262470] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

[    0.262590] PTP clock support registered

[    0.262945] EDAC MC: Ver: 3.0.0

[    0.264001] Advanced Linux Sound Architecture Driver Initialized.

[    0.266857] DMA-API: preallocated 4096 debug entries

[    0.266871] DMA-API: debugging enabled by kernel config

[    0.266947] Switched to clocksource arm_global_timer

[    0.287986] NET: Registered protocol family 2

[    0.288628] TCP established hash table entries: 4096 (order: 2, 16384 bytes)

[    0.288686] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)

[    0.288771] TCP: Hash tables configured (established 4096 bind 4096)

[    0.288816] TCP: reno registered

[    0.288834] UDP hash table entries: 256 (order: 1, 8192 bytes)

[    0.288865] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

[    0.289129] NET: Registered protocol family 1

[    0.289440] RPC: Registered named UNIX socket transport module.

[    0.289452] RPC: Registered udp transport module.

[    0.289461] RPC: Registered tcp transport module.

[    0.289469] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    0.289483] PCI: CLS 0 bytes, default 64

[    0.289913] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available

[    0.291913] futex hash table entries: 512 (order: 3, 32768 bytes)

[    0.294021] jffs2: version 2.2. (NAND) ? 2001-2006 Red Hat, Inc.

[    0.294215] msgmni has been set to 967

[    0.295003] io scheduler noop registered

[    0.295016] io scheduler deadline registered

[    0.295056] io scheduler cfq registered (default)

[    0.308200] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208

[    0.308220] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16

[    0.431336] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps

[    0.999562] console [ttyPS0] enabled

[    1.003817] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000

[    1.011475] [drm] Initialized drm 1.1.0 20060810

[    1.028584] brd: module loaded

[    1.038004] loop: module loaded

[    1.047784] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k

[    1.053537] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.

[    1.061624] libphy: XEMACPS mii bus: probed

[    1.065995] ------------- phy_id = 0x3625e62

[    1.070768] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54

[    1.079444] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    1.086068] ehci-pci: EHCI PCI platform driver

[    1.093316] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?

[    1.100215] usbcore: registered new interface driver usb-storage

[    1.107100] mousedev: PS/2 mouse device common for all mice

[    1.113193] i2c /dev entries driver

[    1.120149] zynq-edac f8006000.ps7-ddrc: ecc not enabled

[    1.125630] cpufreq_cpu0: failed to get cpu0 regulator: -19

[    1.131547] Xilinx Zynq CpuIdle Driver started

[    1.136397] sdhci: Secure Digital Host Controller Interface driver

[    1.142541] sdhci: Copyright(c) Pierre Ossman

[    1.146830] sdhci-pltfm: SDHCI platform and OF driver helper

[    1.153707] mmc0: no vqmmc regulator found

[    1.157746] mmc0: no vmmc regulator found

[    1.196966] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA

[    1.205648] usbcore: registered new interface driver usbhid

[    1.211157] usbhid: USB HID core driver

[    1.215874] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda

[    1.222160] nand: Micron MT29F2G08ABAEAWP

[    1.226134] nand: 256MiB, SLC, page size: 2048, OOB size: 64

[    1.232082] Bad block table found at page 131008, version 0x01

[    1.238305] Bad block table found at page 130944, version 0x01

[    1.244352] 3 ofpart partitions found on MTD device pl353-nand

[    1.250119] Creating 3 MTD partitions on "pl353-nand":

[    1.255224] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"

[    1.263286] 0x000002000000-0x00000b000000 : "angstram-rootfs"

[    1.270604] 0x00000b000000-0x000010000000 : "upgrade-rootfs"

[    1.279544] TCP: cubic registered

[    1.282780] NET: Registered protocol family 17

[    1.287513] Registering SWP/SWPB emulation handler

[    1.293406] regulator-dummy: disabling

[    1.297728] UBI: attaching mtd1 to ubi0

[    1.688267] UBI: scanning is finished

[    1.700117] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0

[    1.707197] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes

[    1.713940] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048

[    1.720643] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096

[    1.727502] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0

[    1.733470] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128

[    1.740602] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1134783803

[    1.749632] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40

[    1.758849] UBI: background thread "ubi_bgt0d" started, PID 1080

[    1.758854] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)

[    1.762757] ALSA device list:

[    1.762760]   No soundcards found.

[    1.779664] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082

[    1.910047] UBIFS: mounted UBI device 0, volume 0, name "rootfs"

[    1.915977] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes

[    1.925116] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)

[    1.934995] UBIFS: reserved for root: 0 bytes (0 KiB)

[    1.940033] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model

[    1.958948] VFS: Mounted root (ubifs filesystem) on device 0:11.

[    1.990853] devtmpfs: mounted

[    1.993961] Freeing unused kernel memory: 204K (c06d2000 - c0705000)

[    3.156169] random: dd urandom read with 0 bits of entropy available

[    3.786997] 

[    3.786997] bcm54xx_config_init

[    4.396989] 

[    4.396989] bcm54xx_config_init

[    7.397826] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz

[    7.403914] xemacps e000b000.ps7-ethernet: link up (100/FULL)

[   21.847149] In axi fpga driver!

[   21.850218] request_mem_region OK!

[   21.853609] AXI fpga dev virtual address is 0xdf9fc000

[   21.858745] *base_vir_addr = 0x8c510

[   21.874460] In fpga mem driver!

[   21.877583] request_mem_region OK!

[   21.881089] fpga mem virtual address is 0xe2000000

[   22.656962] 

[   22.656962] bcm54xx_config_init

[   23.286972] 

[   23.286972] bcm54xx_config_init

[   26.287812] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz

[   26.293828] xemacps e000b000.ps7-ethernet: link up (100/FULL)

This is XILINX board. Totalram:       507527168

Detect 512MB control board of XILINX

DETECT HW version=0008c510

miner ID : 802c548c68808814

Miner Type = S9

AsicType = 1387

real AsicNum = 63

use critical mode to search freq...

get PLUG ON=0x000000e0

Find hashboard on Chain[5]

Find hashboard on Chain[6]

Find hashboard on Chain[7]

set_reset_allhashboard = 0x0000ffff

Check chain[5] PIC fw version=0x03

Check chain[6] PIC fw version=0x03

Check chain[7] PIC fw version=0x03

chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]

has freq in PIC, will disable freq setting.

chain[5] has freq in PIC and will jump over...

Chain[5] has core num in PIC

Check chain[5] PIC fw version=0x03

chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]

has freq in PIC, will disable freq setting.

chain[6] has freq in PIC and will jump over...

Chain[6] has core num in PIC

Chain[6] ASIC[7] has core num=1

Check chain[6] PIC fw version=0x03

chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]

has freq in PIC, will disable freq setting.

chain[7] has freq in PIC and will jump over...

Chain[7] has core num in PIC

Chain[7] ASIC[9] has core num=15

Chain[7] ASIC[12] has core num=15

Chain[7] ASIC[45] has core num=3

Check chain[7] PIC fw version=0x03

get PIC voltage=57 on chain[5], value=910

get PIC voltage=91 on chain[6], value=890

get PIC voltage=91 on chain[7], value=890

set_reset_allhashboard = 0x00000000

chain[5] temp offset record: 62,-90,0,0,0,0,37,0

chain[5] temp chip I2C addr=0x98

chain[5] has no middle temp, use special fix mode.

chain[6] temp offset record: 62,-78,0,0,0,0,37,0

chain[6] temp chip I2C addr=0x98

chain[6] has no middle temp, use special fix mode.

chain[7] temp offset record: 62,-70,0,0,0,0,37,0

chain[7] temp chip I2C addr=0x98

chain[7] has no middle temp, use special fix mode.

set_reset_allhashboard = 0x0000ffff

set_reset_allhashboard = 0x00000000

CRC error counter=0

set command mode to VIL


--- check asic number

After Get ASIC NUM CRC error counter=0

set_baud=0

The min freq=700

set real timeout 52, need sleep=379392

After TEST CRC error counter=0

set_reset_allhashboard = 0x0000ffff

set_reset_allhashboard = 0x00000000

search freq for 1 times, completed chain = 3, total chain num = 3 

set_reset_allhashboard = 0x0000ffff

set_reset_allhashboard = 0x00000000

restart Miner chance num=2

waiting for receive_func to exit!

waiting for pic heart to exit!

bmminer not found= 1491 root       0:00 grep bmminer


bmminer not found, restart bmminer ...

This is user mode for mining

Detect 512MB control board of XILINX

Miner Type = S9

Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff

set_reset_allhashboard = 0x00000000

set_reset_allhashboard = 0x0000ffff

miner ID : 802c548c68808814

set_reset_allhashboard = 0x0000ffff

Checking fans!get fan[2] speed=1440

get fan[2] speed=1440

get fan[2] speed=1440

get fan[2] speed=1440

get fan[2] speed=1440

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

get fan[5] speed=5280

get fan[2] speed=1440

Fatal Error: some Fan lost or Fan speed low!

前后双风扇都正常,就是系统里面检测不到风扇转速

0 人关注了该问题 关注

0

银河 • 4月前

国网水电,新疆整顿,实力矿场接托管,机位不多,有需要的同僚欢迎来咨询,13160698780

0 个讨论

您需要登录后才可回复
0

大型火电矿场招租 17683740679 • 5月前

自营矿场招租(新疆石河子)

国网电:量大来谈

机位:20000

矿场环境:专业运维团队驻扎矿场,实时维护电网稳定、

除尘降噪、温控保湿等机器运行环境

矿场微信: jiafu1771143260

手机号: 17683740679


0 个讨论

您需要登录后才可回复
0

小哈板 • 6月前

换风扇,,,风扇在转不一定就是正常, some Fan lost or Fan speed low一些风扇丢失或者风扇转速低,你可以拿一个不是很硬的东西伸到风扇里面就可以知道是前风扇还是后风扇转速低了

0 个讨论

您需要登录后才可回复
0

逸飞网维 • 6月前

已经恢复出厂设置,重新刷了固件,还是问题依旧,

0 个讨论

您需要登录后才可回复
您需要登录后才可以回复